The PCB board using military-grade board, mainly used for the DIY electronic pre-inverter stage.
Adopt a high-quality printed board, durable to use.
Product Name: 150W Inverter Boost Circuit Board
Input Voltage: DC12V
Output Voltage: 110V/200V/220V/280V (Marked on the PCB. Can be set with jumper onboard)
Output Wave Form: high frequency square wave or DC(un-filtered)
Quiet stream: approx. 0.05A
Output waveform: square wave
Working Frequency: 37kHz
The board is a high-frequency square wave AC output is generally inductive electrical tape can not be “mortar, fen coil transformer etc.
Take a small load (LED lights phone charger DVD decoder, etc.) connected to the output voltage of the recommendations, such as low gear: 172V or 200V.
Large long working hours load (≥100W) is recommended to increase the heat sink.
The power cannot be reversed. The other power supply and the power cord must have a large enough current. 5. No overload, no short circuit output. 6. The multimeter load voltage output frequency will appear higher (incorrect, not the actual voltage
Only logged in customers who have purchased this product may leave a review.