, , ,

PICKit 2 Programer V2


Compare

230.00EGP

Installing Pickit 2 Software

Download and Install the Pickit2 software from the below link.

Pickit 2 Software Setup

Step1: Connect the Pickit2 programmer to target board as shown below. Ensure the Boot Jumper is disconnected.

PICkit2andstater.jpeg

Step2: Run the Pickit2 application and check the device communication as shown below.

PICkit2 check communication.png

Step3: Now status window should show PICkit 2 connected, with proper device(PIC16F877A), else double check the connections and try again.

PICKit2 application software.png

Step4: Import the .hex file from the menu File->Import Hex as shown below.

PICkit 2 import hex file.png

Step5: The Configuration bits should be set to 0x3F3A. Now click on Write to upload the hex file to target device.
Status window will show the uploading status.

0PICkit2 succesful.png

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PICKit 2 Programer V2”

There are no reviews yet.