RF-800 Liquid Flux 1Liter

RF-800 soldering liquid flux is designed to provide excellent soldering results during the assembly of electronic boards by manual, dip, or wave soldering; improves the soldering process, minimizes defects, ensures strong joints, enhancing quality and performance for through-hole and SMD components.

Features

• No-Clean flux.
• No-residue post soldering, environmentally friendly and safer.
• Formulated mostly with an organic alcohol, very small percentage of rosin, Free halogen and non-halide activators.
• It’s ideal for Sn63/Pb37 alloy and solder paste.
• Compatible with lead-free solder alloy.
• High quality, soft and shiny soldering.
• Neutral acidity, non-corrosive and fungus resistant.
• 1Lit is enough for tin soldering a lot of PCBs in a few seconds by using manual, dip or wave soldering.

Usage

• Manufacturing of electrical & electronic boards and photoresist PCB.
• It can be used as a spray during assembling and repairing PCB.

Usage Recommendations (very important)

• Follow safety precautions & notes.
• Ensure that the surface of PCB and its components are clean and free of any residue or dust.
• Apply the flux to the PCB and its components by using the appropriate method.
• Soldering Process:
• Dip Soldering: Secure the PCB with a holder or crucible plier tong and then immerse it in the molten solder by using an appropriate technique for the soldering machine, this process lasts for a short period (usually 3 to 10 seconds), with a slight movement (optional) to ensure that soldering covers all the points.
• Wave Soldering: During this process, the PCB is preheated to activate the flux and protect the PCB from thermal shock, the PCB is then moved in molten solder waves.
• Manual Soldering: Secure the PCB and solder all pins using a soldering iron with wattage appropriate.
• Cooling: Leave the circuit board in the air until the solder is solidified.
• Cleaning (optional): Remove any residue from the PCB by alcohol or thinner.

Notes

• For best results, follow the usage recommendations.
• Suitable with foam, wave, spray and mist fluxers at assembling PCBs.
• Compatible with many tin soldering systems.
• Suitable with PCB/BGA/PGA/PPGA/SMD and all sensitive electronic components.
• Not suitable with welding by fusion or flame.

Safety Precautions

• Close after using & keep away from children.
• Use enough water when eyes or wounds are touched.

Appearance

The flux is a light yellow liquid, packaged in a transparent plastic bottle, (Net capacity) 1Lit.

Thanks for Your Trust